![]() ![]() Like! They’re just hunks of plastic! The black Simply pop them out and put them in whatever order you #Xplorer guitar how to#You’ve ever wondered how to change the order, now is You’ll find the rubber for the frets and the frets themselves. There are two small screws to remove, these can be tricky but if you keep a light but firm touch they’ll come out. Inside you’ll find the Printed Circuit Board (PCB) for the frets, the cable to connect it to the rest of the circuits, and not much else! To get the PCB off, you need a cross-head screwdriver, only a slightly smaller one. The neck is the simplest part of the guitar, so we’ll start there. Apologies for the less than stellar quality on this one. For this, I’m going to be taking everything apart to show you the internals, so I’ll be taking them all out. Note: if you need to do anything with the strum you’ll need to open the neck as well due to the ribbons for the fret PCB. I recommend removing the 11 screws from the body first, as you can remove that without removing the neck, so if you only need to get in the body, you can ignore the neck without worry. Red circles are the neck screws, just for clarity. The 17 th (in yellow circle) is for the neck strap and doesn’t secure the neck itself, so you can safely ignore it. ![]() ![]() There are 17 screws in total, 16 that actually need removing to get in. In order to get inside, you’re going to need a simple cross-head screwdriver, preferably a smallish one. It’s easy to use and set up, pretty much just plug and play once the driver installs. It’s a single unit, wired affair that uses the Xbox 360 ‘breakaway’ cable to connect to your PC/Console. This is one of the ‘meta-guitars’ for CH and honestly is my favourite. So I’m going to start with my main Clone Hero guitar, the Xplorer for the Xbox 360. Don’t know why I took it the wrong way round! ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |